iDo is project of inteligent device for small or home automation. iDo measure temperature, time, switch heating pump or control opened windows and so on. All what do you want shortly and cheaply.

HWg-PWR is an Ethernet-enabled device for remote monitoring and metering of electricity, heat, water or gas consumption using electricity meters, water meters, gas meters, heat meters and other sensors equipped with the M-BUS interface. In addition to metering, the device also supports alarming through e-mail or SNMP traps whenever allowed values are exceeded.

HWg-WLD is a network-enabled water leak detector with a water-absorbing sensing cable. HWg-WLD features a built-in web server, SNMP support, and e-mail alert to water flooding. HWg-WLD can remotely control a relay output over the network (a relay is switched when a water leak is detected along the sensing cable).

Damocles 1208 provides remote monitoring of electricity consumption. Damocles 1208 is a device with 12 remote inputs and 8 outputs controlled over Ethernet with Web interface. Typical application of Damocles 1208 involves energy consumption monitoring by counting pulses from meters. Damocles 1208 has pulse counters on digital inputs. The device provides M2M communication for connection to SNMP and SCADA systems. The device supports E-mail and SNMP trap notifications of input state changes. Box-2-Box mode - outputs can be controlled over the LAN by another device.

IP WatchDog HWg-WR02a monitors two devices over IP (PING/WEB) or serial line (RS-232), automatically restarts any of them if it stops responding – autonomous ping relay restarter.

Example of a remote door, temperature and humidity monitoring solution. Whenever a door opens, a notification is sent by e-mail or SNMP. Supplied door contacts fit any door, or even the side boards of a 19" rack.

The Poseidon model 3268 is a small web server that can send Email, when a contact is switched or when temperature and humidity gets out of preset range. You can also control two relay outputs from web interface and turn off e.g. a server. The model 3268 notifies of an alarm via Email, SNMP Trap or via switching output relay.

HWg-STE PoE is IP enabled web thermometer with Email alerts and SNMP. The device measures temperature and humidity with two external probes. It´s powered over Ethernet or from wall plug adaptor.

For IT applications in cabinets or outdoor locations, maintaining the stable temperature and humidity range is critical. Poseidon 3468 is used as an independent thermostat and hygrostat, with remote monitoring and control over TCP/IP.

 

The remote power switch is connected to a LAN (IP) and controlled from any application. Open a gate or switch on a light (230V/16A relay output) by clicking an icon on your desktop. The relay output can be controlled from Windows or Linux, from the command line or from a GUI.